Rastergraf Eclipse3 Series Manual de usuario Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 85
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
Rastergraf
1-12 General Information
Environment: Temperature: 0 to 70 degrees C, operating
-55 to +85 degrees C, storage
Humidity: 5% to 90%, non-condensing
Enhanced Status: Special order features include:
Three LEDs that can be driven by host CPU software.
A 2Kb Serial EEPROM stores the serial number, display
timing information, and customer specific parameters.
An LM75 thermal sensor provides limit flags and real-time
temperature read-back.
Ruggedization Option: Rastergraf offers semi-ruggedized versions of the Eclipse3
boards include a MIL-compliant silicone or acrylic
conformal coating and extended temperature testing.
Rastergraf board designs use standard distribution
commercial temperature range parts. No formal component
tracking is maintained. .
Boards are protected with either Acrylic (Miller-
Stephenson MS-475) or Silicone (Miller-Stephenson MS-
460) or equivalent and are MIL-I-46058C, Type SR and
MIL-T-152B compliant. The board is tested under extended
temperature conditions as shown on the next page.
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 84 85

Comentarios a estos manuales

Sin comentarios